What is the wheelbase of Sakura D4 car body? Analysis and data summary of hot topics across the entire network
Recently, discussion among model car enthusiasts about the wheelbase of the Sakura D4 body has soared, becoming a hot topic on major forums and social platforms. This article will combine the hot content on the entire network in the past 10 days to provide you with a detailed analysis of the wheelbase parameters of the Sakura D4 car body and provide structured data comparison.
1. Basic information about Sakura D4 body shell and wheelbase
As a classic drifting frame, the Sakura D4 has attracted much attention for its shell adaptability. According to user measured data and manufacturer information, common car body wheelbases are as follows:
| Body type | Wheelbase (mm) | Adaptability |
|---|---|---|
| Standard 190mm body shell | 257-260 | perfect fit |
| 200mm wide body shell | 260-265 | Wheelbase needs to be adjusted |
| Custom short axle body | 240-250 | Chassis needs to be modified |
2. Analysis of hot topics on the entire network
1.Wheelbase adjustment tips: Most discussions focus on how to achieve different wheelbase requirements by adjusting the swing arm hole position or replacing accessories.
2.Body shell compatibility: About 35% of the posts involve the problem of adapting car shells of other brands to the Sakura D4, especially the modification scheme of Tamiya car shells.
3.Performance impact: 22% of the discussions focused on the impact of different wheelbases on drift stability and steering characteristics.
| discussion topic | heat index | Main platform |
|---|---|---|
| Wheelbase measurement method | 85% | Tieba/Bilibili |
| Car shell buying guide | 78% | Taobao/Xianyu |
| Modification case sharing | 63% | Douyin/Kuaishou |
3. Advice from professional players
1.Original factory configuration: The original chassis of Sakura D4 supports 257mm wheelbase, which is the most stable setting solution.
2.Modification suggestions: If you need to adapt to the 250mm wheelbase car shell, it is recommended to use Yokomo SD series conversion parts.
3.Measurement points: The actual measurement should be from the center point of the front wheel to the center point of the rear wheel, including the tire compression amount.
4. Actual measured data of popular car body wheelbases
| Car shell brand | Specific model | Nominal wheelbase | Actual measured wheelbase |
|---|---|---|---|
| Tamiya | TT-02D | 257mm | 258mm |
| HPI | Racing | 260mm | 262mm |
| Yokomo | DP-302 | 255mm | 254mm |
5. Precautions when purchasing
1. Be sure to confirm the frame version before purchasing. There are differences in the position of the wheelbase fine-tuning holes between the 2018 model and the 2022 model D4.
2. It is recommended that the wide-body body be equipped with a +5mm wheel hub offset to avoid steering interference.
3. When the transparent car shell needs to be drilled by yourself, it is recommended to make a paper template for positioning first.
From the above data analysis, it can be seen that the standard wheelbase of the Sakura D4 car body is concentrated in the 257-260mm range, but it can be adapted to different car shells in the 240-265mm range through reasonable modification. It is recommended that novice players give priority to choosing a car shell with a nominal 257mm for the best control experience.
check the details
check the details
en
