How to tighten hexagonal screws: guide to using popular tools on the Internet
Recently, the discussion on the use of tools has been very popular across the Internet. In particular, "How to tighten hexagonal screws" has become one of the life skills topics with the fastest growing search volume in the past 10 days. This article combines the latest hot data and practical methods to provide you with a detailed operation guide.
1. Statistics of relevant hot spots in the past 10 days
| platform | Search volume increase | Popular related words |
|---|---|---|
| Baidu | +320% | What to do with hexagonal screws? |
| Douyin | +285% | Tightening hexagonal screws without tools |
| Zhihu | +180% | Hexagonal screw specifications comparison table |
| +150% | Special-shaped screw removal skills |
2. Standard steps for tightening hexagonal screws
1.Tool preparation: Select the hexagonal wrench of corresponding specifications according to the size of the screw. Common specifications are as follows:
| Screw model | Distance across sides (mm) |
|---|---|
| M3 | 2.5 |
| M4 | 3 |
| M5 | 4 |
| M6 | 5 |
2.Correct operation technique: Keep the wrench in vertical contact with the screw at 90 degrees. Turn clockwise to tighten, and counterclockwise to loosen. Important reminder: Never use an adjustable wrench to operate hexagon socket screws!
3.Frequently Asked Questions: When encountering slippage, the following emergency plans can be adopted:
| Question type | solution |
|---|---|
| Internal hexagon fillet | Use rubber pads to increase friction |
| Damaged screw head | Counter-thread tap extractor |
| Space is limited | L-shaped short handle wrench |
3. Innovative methods that are hotly discussed across the Internet
1.Internet celebrity emergency method: A video of using a paper clip to fold into a hexagonal shape received 2.8 million likes on Douyin. Actual testing has proven that it is only suitable for small screws below M2.
2.3D printing solution: Zhihu’s highly praised answer recommends using PLA material to print temporary wrenches. The strength test data is as follows:
| Material | Withstand torque (N·m) |
|---|---|
| PLA | 4-6 |
| ABS | 8-10 |
| metal composite | 15+ |
3.Magnetic tool set: Recent Taobao data shows that the sales of magnetic hexagonal wrenches increased by 47% week-on-week, which mainly solves the problem of tools falling easily in small spaces.
4. Professional maintenance suggestions
1. Be careful when buying toolsCR-V alloy steelMaterial, hardness needs to be above HRC52;
2. Regularly check the tool edges and corners for wear, and replace them immediately when wear exceeds 0.2mm;
3. Screws of different materials need to be used with anti-rust agents, especially when maintaining outdoor equipment.
Through the systematic guidance in this article, you can not only master the standard hexagonal screw operation specifications, but also understand the most popular innovative solutions. It is recommended to save it for later use so that you can quickly refer to the corresponding handling methods in case of emergency.
check the details
check the details
en
